Join the ISSA 25-cone series. 5 international sessions per year.
Create your own local race. Discover slalom skateboarding now!
| World Ranking | 25-cone Series | Calendar

Joel Crawley

Excellent timing system for slalom or any other activity where you need a start and finish line. This is the older model which is wired. I however will include two 100' of wire cables with soldered connections. This unit also included the upgraded stopwatch which will recall the last five times. Hon...

Joel Crawley

Subsonic Swift 42 dropped deck. Length: 42" Width: 11" Drop: 2" Wheelbase: 33.5" Blue stain with wheel wells and the Hurricane grip. It's a pretty stiff board even though I specified average flex for my 185#'s. It's in great shape other than the ding you can see in the pic below. $125.00 shipped in ...

Joel Crawley

It's got some real gnarly grip on it.

Joel Crawley

Well I'm running it exactly the way Richy sent it to me. It was a matter of some concern for me since I haven't ran any wedging since I got my Rads. However I was persuaded to run it this way and I have to admit I'm hooked. I took it out today and ran a cyber course just so I could have some basis f...

Joel Crawley

Thought I'd post a pic of a new soldier.

Joel Crawley

Couple of Pics

Joel Crawley

Yo Joel -- Leave the wedging -- ride like the Kings. Make sure your back truck is adjusted firm and the front is adjusted for quick turning. The AXE is designed for the front to turn and the back to drive & accelerate. Radikal is an excellent truck choice and works great with the AXE and the AXE we...

Joel Crawley

For anyone concerned , Any Top racer wedges there trucks alot for max reaction! All bolts bend because of the Angles . Maybe you guys should try this and brave the new world!!!! Dont be afraid the speed wont kill you! No Axe rider has ever had any probs with hardware ! Wow I didnt know We now have ...

Joel Crawley

This is in excellent shape. Grip is the only thing that you'd know it was used. Roe Unlimited 32" Performance Series. Carbon Fiber bottom. Light and quick. Overall length: 32" Overall width: 9" Camber height: 3/8" Wheelbase: 20-21" Medium -Stiff flex (160-190 lbs) $80.00 shipped in the US. Paypal on...

Joel Crawley

Jack,

Just wanted to get back with you after we talked. Got everything working well. Thanks for your help. It was much appreciated.

Thanks again,
Joel

Joel Crawley

Hi Jack, Thanks for getting back with me so soon. Could this be something I could hold off on? In other words can I just back the insert back in with the kingpin and use it safely until later? I'd hate to be without my baseplate while the weather's still nice. Just wondering if I could hold off unti...

Joel Crawley

I was replacing the bushings in my rear truck. When I attempted to remove the kingpin from the truck I noticed it seemed tighter than usual. Well it seems that I wasn't removing the kingpin from the baseplate but I was actually backing the kingpin insert out as well. It got to a certain point (not a...

Joel Crawley

Rusty, I bought one of your timing systems. It's great. Easy to setup and working like a charm. I realize you're asking about dual lane systems and I don't really have anything to add that might help you out but..... I do have a question. I was out running cones with your timer yesterday and thought...

Joel Crawley

Wow! Very nice. Lucky Aussies.

Joel Crawley

I'm using a Radikal Tail and 66mm ABEC11 Zig Zags. Right now the truck has .500 axles. I'd like to go to the .375's but I'm not sure there would be enough clearance between the wheels and the trailing arms. There is a 1/4" between them now and if I go with the shorter axles in theory (well I suppose...

Joel Crawley

I certainly could've asked this question in the general category but since I'm interested in the Pocket Pistols I figured I'd be better served here. Is the advantage the "snap" that these boards allow? I want something for TS and have found that I'm not interested in too much flex. Seems like it rob...

Joel Crawley

I'd like to get together and do some cones with anyone in central Indiana. I live just west of Indy and work there (Indy) so I'm around.

Would like to get something going (yikes this sounds like a personal ad) if you're interested.

Joel Crawley

Everything SOLD

Joel Crawley

Joel Crawley

Yeah stand by. I'll get you a pic.

Joel Crawley

I would agree that the wheelbase should be from axle to axle. That essentially is a wheelbase. However that wheelbase is dependent on what trucks you're using. Hence (and I'm only assuming this) manufacturers/builders rely on the "inner hole to inner hole" measurement because that's a static measure...

Joel Crawley

Cleaning out some stuff. Pretty sweet old Santa Cruz slalom board. Rare Santa Cruz Teamrider OJ II Slalom wheels, Tracker Ulta Light Six Tracks and German GMN bearings. Santa Cruz Loaded Graphite Slalom complete Nice long park or cruiser board. A BDS Gashead 38" longboard with Seismic 155's (quick f...

Joel Crawley

For sale Seismic Hotspots. Two red (74a) and two white (80a) wheels. Used but barely. Still in excellent condition. No coning or side wall tears. 69mm Height Would make excellent slalom wheels for someone. $30.00 shipped (US) Paypal only I've also got a set of BDS Gassers you can check out here: BDS...

Joel Crawley

Isn't there some way they could blow fans across the surface to keep the condensation from developing in the first place?

Anyway I can't wait to see it. Good luck! But don't worry its just the whole world watching

Joel Crawley

You're right I'm no lawyer. I have no idea other than as I said you were doing something that was against the rules got "busted" for it and cried about it. You sound like a typical spoiled kid that has everything given him and when you finally got out into the big world you found there are rules tha...

Joel Crawley

I'm not going to debate this on the internet nor did I say the law is "right." However there are many laws that aren't exactly right. But that doesn't mean you can disregard the ones you don't agree with. You most certainly can have your car impounded. Even for a minor traffic violation. It doesn't ...

Joel Crawley

While I feel for your plight the bottom line is you're not allowed to skate on campus. I'm sure it sucks but that's the law/rule.

Joel Crawley

griptapeguru wrote:If it helps, I want it for TS, and I ride rts/x's with khiro whites up front, and blues in the back.

Joel Crawley

Since I hijacked this thread a little I thought I might be able to give you a bit of info. Check out this thread over at Silverfishlongboarding It doesn't exactly specify what degree to use but it's pretty informative. I run 10º positive on front and 10º negative in the rear. Not really by any desig...

Joel Crawley

Jani I just sent you an email about the same situation. It got bounced back to me.

Joel Crawley

That's an interesting idea. So basically you're using the piece of rod to sort of jam the bolt in the hole? If I get your meaning. I thought about (actually it was suggested to me) using something like JB Weld to hold the bolt in place. My only concern there would be if I ever needed to replace it I...

Joel Crawley

I have a set of Chicken Indys that have very short kingpins (2") which I'd like to be able to switch out to 2 1/2" but they are those button top ones with a knurl to fits into the hanger. Is there anyplace that I could get such a bolt? I would just go to the hardware store and get a pair of grade 8 ...

Joel Crawley

That's a lot of rare stuff you got there Greg. Good luck with your auctions.

Joel Crawley

Erin I asked the same question....albeit early in the order and you replied to my question that you were still waiting. I can't believe you're still waiting! I ordered in mid October. Since you said you were waiting (at that time over 8 weeks) I didn't think much of it. But now I'm kind of concerned...

Joel Crawley

Or if you have one for sale without the trade I'm interested.

Joel Crawley

Larry have a look at this: http://web.infoave.net/~private/MAHER.HTML

Joel Crawley

I have a almost new set of Randal II 150mm trucks along with a almost new set of Gumball (75a) that I'm looking to trade for a rear offset slalom truck.

Preferably 90-110mm in stable geometry.

If interested let me know.

Thanks!

Joel Crawley

Got a hold of Dave and I ordered one today. Didn't have any white TS's but he said he'd get it right out! Yeah!

Joel Crawley

Well I'm not particular but man! Fred that looks sweet! Like I said I'm more interested in getting one quickly. White would be a bonus.

Thanks for the info.

Joel Crawley

I've been thinking of ordering a CK TS but I don't see an choice for a white formica bottom. Is this not an option? Also if I may ask.... are this made to order? I don't want to wait long. I'm trying to get one before it's to wet and cold to ride here.

Thanks.

Joel Crawley

Thanks guys. I figured as much but I did notice that some of the other models did show the two mounting points so I wanted to make sure.

8-10 weeks!!!!! Man. Well that will affectively take care of my riding until spring.

Joel Crawley

Hello, I ordered a Roe Unlimited PS last week. I've got a question. On the site it states the wheel base is 20"+21" which I'm guessing is due to two sets of mounting holes in the back? Yes? From the picture is just shows on set. I saw no option to choose which one so I can only assume it's adjustabl...

Join the ISSA 25-cone series. 5 international sessions per year.
Create your own local race. Discover slalom skateboarding now!

| World Ranking | 25-cone Series | Calendar

Search found 42 matches

FS: Equine Timing System (wired) SOLD

FS: Subsonic Swift 42 SOLD

New recruit for the Axe Army

Re: Wedges

FS: Roe 32" Unlimited PS deck

Kingpin Insert?

Radikal Dragon Tail+Zig Zags=Shortest Axle length?

Foam Cores what exactly is the advantage?

Any central Indiana people here?

Vintage Santa Cruz Loaded Graphite, BDS Gashead completes.

FS: Seismic Hotspots *mixed duros and some vert wheels too.

Re: Wedging advice

Surely Indy Kingpins aren't a custom hardware piece?

Looking for a offset rear truck possible trade

White bottomed Conekillers?

I just ordered an Unlimited PS... got a question