first i want to say hello to all, introduce and apologize for my first posting to be some advertising.
my co-partner arne and me are product-/industrial-designers and are building custommades since last year. we do slalom-, downhill- and cruising-decks.
you can check our last years work on our website
http://www.wefunk.de
this year we started experimenting with vacuum-lamination and this is our first gs foamcore proto:
![Image](http://www.slalomskateboarder.com/Boards/Wefunk/foamyproto.jpg)
![Image](http://www.slalomskateboarder.com/Boards/Wefunk/setup.jpg)
![Image](http://www.silverfishlongboarding.com/forum/files/camber_456.jpg)
![Image](http://www.silverfishlongboarding.com/forum/files/concave.jpg)
specs:
- size 800 x 205 mm
- wheelbase 560 mm (inner truck bolts) or 620 mm (axle-axle)
- weight 520g
- 10 mm concave
material:
- 14 mm airex foamcore (will be 8, 10, 12 mm in future models)
- uni- and bidirectional fibreglass
- texalium
- glass/carbon stringer
- epoxy resin
the next decks (foam for 20 decks is ordered) will sport inlays (? plates fitted in the top, below the laminate) to allow use of "normal" mounting screws (you know: so that they are flush with the top of the deck)
let me know what you think!