Page 1 of 1

wefunk TS foamcore protos

Posted: Mon Aug 16, 2004 11:45 am
by Alex Luxat
these are our new protos for tight slalom:

Image

Image

Image

Image

the specs are:
size: 750 x 215 mm / 29.5" x 8.5"
truckbase: 470, 490 mm / 18.5", 19.3" (inner holes)
8mm (0.3") airex foamcore, inforcements for trucks
hard flex
weight 600g (1.3 lb) (heavier than the gs -> additional torsion layers)
lightblue-metallic (blue dyed resin / silver texalium)



this is the s-camber foam proto designed by my partner Arne:


Image

Image

Posted: Mon Aug 16, 2004 7:34 pm
by Alex Walters
Those are some really nice looking boards. I've seen photos of many wefunks and they all look so amazing.

Wefunk Koln 2004

Posted: Wed Aug 18, 2004 11:47 pm
by Sam Gordon
Alex and Arne are very good product designers and problem solvers. I had been impressed by the handsome deck shapes and designs from the website www.wefunk.de , but being a comparatively new company, the boards had yet to make an appearance in the European slalom races such as Paris or Greuningen (I may yet be corrected on this).

Koln was a good opportunity for a closer look.

Image Image Image Image

As you can see from the rider in the third image, I was not alone.

Even from a jobbing Am as myself, Alex was keen to glean what one would look for in a deck, and why. Typically I ride a Roe S-Camber with Radikal trucks. I happened to mention that I liked the wider tail with the S-Camber shape in order to cover the bases of foot placement error, but not so wide as to cause oversteer. A forgiving, yet still purposeful shape, if you like.

On the Saturday Arne's S-Cambers were prototypes on a stand. By Sunday, in time for the TS, one deck (above) had been built up ready to race. It was as yet untried.

As fate had it, Alex was drawn against me for the qualifying; he in the left hand, more slippery track, myself on the traction-loaded right-hand-side.
A parallel start ensued with Alex in my peripheral view. After around cone twelve I heard a loud German curse as my fellow competitor blew out of the course.

New board, new setup. Not surprising.

We were soon called again for the second run, tracks reversed. Again a comparable start, but Alex had obviously adjusted his trucks in the interim and now was charging down the right hand course. He crossed the line just a fraction ahead of me, but the times might not so relate because he caught an extra couple of cones on the way down.

That he could feel so comfortable and ride so aggressively on a new deck with untried setup speaks volumes for these boards. That they can be custom made to one's own specs adds to their attraction.

It is very healthy and exciting to see European companies such as Airflow, Indiana, Kaliber, Ettsexett and Wefunk producing decks that are comparable to the best of American product.

Choice has become that little bit more difficult. Good work, gents!

Posted: Thu Aug 19, 2004 3:15 am
by Karl Floitgraf
Alex, I loved the foam core blue one I tried, I plan to order one eventually. Never have a ridden such a light right. Doesn't need to be pulled through gates.

I love the woody dan gave me I am hauling ass on it, if I had this for the race I would have been a good 5 places up.

Nice work guys.


Hey Sam, hows everything?

Posted: Thu Aug 19, 2004 2:17 pm
by Ron Barbagallo
Alex is a board building GENIUS!!!

And a great guy as well!



How's the little one doin', Alex?

Posted: Thu Aug 19, 2004 4:31 pm
by Alex Luxat
thanks for all the compliments on our work.

@ Sam: yeah, i know it was not sooo wise to ride a new setup at the race. but it made not a big difference cause i hadn´t had time to train TS the weeks before the race.
racing with you was fun and a pleasure.
i hoped to continue this in antibes but my family and business issues take more of my attention at the moment.

@ Karl: i´m really glad that you like the deck Donald gave to you.
we should try to find a way how to get you a s-camber foamy without making the shipment a huge part of the bill.

@ Ron: thanks! and thanks for asking: Sven is doing very fine.
he weighs 9kg now and he is ready to smile and laugh anytime when he is awake.

Koln

Posted: Thu Aug 19, 2004 6:35 pm
by Sam Gordon
Alex, racing both you and Donald was exciting and close. I was certainly made to work hard, too blooming hard for me! Everyone in Koln made me feel very welcome, from Andi picking me up at the airport, to Uwe looking after the UK crew thereafter.

I was also most impressed that Karl's beer-induced slalom technique improved once he stopped using a board (he certainly had wobbly shoes on Saturday evening); only one of your excellent products could possibly change all that! I might catch up with the lad at Morro... if my liver can take it.

It's very good to hear that Team Luxat is doing well. Best wishes to all.

One word as regards the new TS information. It may be of benefit to the American audience if you put the deck measurements and wheelbase in inches as well as mm so that each board can be directly comparable to an American counterpart.

Remember: The Wefunk boards perform as good as they look!

Posted: Mon Sep 06, 2004 11:57 am
by Alex Luxat
@ Sam: thanks for the hint: i added measurements in inches.

just wanted to show this pic:
left to right: my sisters hybrid/GS and TS boards, my TS board

Image

we now got our grippins and they really rock. 84/81a for the rough cologne roads is just right for a fast and grippy ride. (could gone harder but i prefer a smooth ride).

yesterday we rode the ESC GS course (which is kinda tight) and i felt better on my short deck with the longer wheelbase than on my GS with the short wheelbase. i think the grippins (instead of avalons) had a part in this also.

Posted: Mon Dec 20, 2004 9:14 am
by Noah Koski
nice decks those are realy awsome i want one

THAT WOOD DECK LOOOKS SWEET

Posted: Tue Jan 25, 2005 2:44 am
by Ben Himovitz
that wood deck in the post above looks pretty cool. would you make another or just e-mail me a template for that shape? himotomas@hotmail.com thanks mate

Posted: Wed Feb 02, 2005 3:05 pm
by Alex Luxat
hey ben,
sure i would build you another one. (do you mean the one with the natural look or the black one?)
i put up general info about our pricing here:
viewtopic.php?p=23485#23485

Posted: Sun Feb 20, 2005 3:02 am
by Karl Floitgraf
I just set this up...
Image
Image
Image

This is the lightest/ smoothest pumping deck I have ever ridden or seen. Nice Job guys!

Posted: Sun Feb 20, 2005 10:23 am
by Alex Luxat
very sweet setup Karl!
the only thing i noticed when i was riding the other one was that it needs plenty of wedge in the rear. i had the fat 11° g-truck wedge in rear and could have used even a touch more.
but i suppose that´s a question of personal taste on how much steering you like on the rear truck.

Posted: Tue Apr 26, 2005 6:34 am
by Karl Floitgraf
I just came to realize the brillance of this deck, I put avalons on it. While it may seem like nothing what stuck me as interesting is that it's an s-camber. I don't know about the new roe s-cambers but on my airflow it's hard to get avalons with out getting wheel bite. The way the wefunk foam cuts away allows you to put bigger wheels on. Still having fun!