Splitfire Pro

Split-Fire Skateboard Trucks

Moderator: Gary Fluitt

Post Reply
Kevin Dunne
Posts: 113
Joined: Tue Jan 24, 2006 3:08 am
Location: Oceanside, Ca.
Contact:
Contact Kevin Dunne

Post by Kevin Dunne » Sun Dec 10, 2006 2:19 am

Here's the boards you need for 6 inch cones! http://www.techdeck.com/products/extremes/4835.htm
Those things cramp my feet...
Top
Karl Floitgraf
Slalomspot.com
Slalomspot.com
Posts: 584
Joined: Wed Jun 18, 2003 2:00 am
Location: North America
Contact:
Contact Karl Floitgraf

Post by Karl Floitgraf » Wed Dec 06, 2006 4:18 pm

Pat Chewning wrote:
Gary Saenz wrote:I took it out for the first time today. I was able to run 6" cones with it. .
As good as Splitfires might be, I doubt that they allow you to run cones spaced at 6 INCH CENTERS.

-- Pat
Here's the boards you need for 6 inch cones! http://www.techdeck.com/products/extremes/4835.htm
Top
T Whalen
Posts: 131
Joined: Thu Sep 01, 2005 4:55 am
Location: Cape Cod, MA

Post by T Whalen » Thu Nov 09, 2006 3:50 am

Thanks for all the feedback.
Top
Steve Pederson
Steve
Steve
Posts: 440
Joined: Sun Aug 06, 2006 2:29 am

Post by Steve Pederson » Wed Nov 08, 2006 5:40 pm

:-)
Last edited by Steve Pederson on Fri Feb 12, 2010 4:12 am, edited 1 time in total.
Top
Pat Chewning
Pat C.
Pat C.
Posts: 1400
Joined: Mon Sep 16, 2002 2:00 am
Location: Portland Oregon

Post by Pat Chewning » Mon Oct 02, 2006 5:09 am

Gary Saenz wrote:I took it out for the first time today. I was able to run 6" cones with it. .
As good as Splitfires might be, I doubt that they allow you to run cones spaced at 6 INCH CENTERS.

-- Pat
Top
Stephen Lavin
Topsider
Topsider
Posts: 339
Joined: Sun Mar 19, 2006 5:50 am
Location: Chicago, Illinois
Contact:
Contact Stephen Lavin

Post by Stephen Lavin » Mon Oct 02, 2006 4:17 am

Have had the R3 with the bearing now for almost 4 weeks. Have tried the UB and the Randall 60* baeplate. I like the R3 and the UB and put them on my AXE I @ 20* after finding the sweet spot on an E Series PP upfront @ 15*. Great truck.
SL
LAVIN
Top
Gary Saenz
Posts: 120
Joined: Fri Sep 23, 2005 7:13 pm
Location: Bryan, TX
Contact:
Contact Gary Saenz

Post by Gary Saenz » Mon Oct 02, 2006 2:56 am

I got one of the 90 Splits with the bearing in the kingpin hole a couple of days ago. I spaced it out to 110mm, added 20 degrees of wedge and mounted it on the front of an Axe III set at 22" wheelbase. I took it out for the first time today. I was able to run 6" cones with it. I'm dropping the wedging back down to 15 degrees and see how it behaves. I'm almost ready to put my Radikal for sale that's on my Axe II and slap another one of these Splitfires on it. The combo of the bearing and the added cutaway has turned it into a very turny truck.
Top
T Whalen
Posts: 131
Joined: Thu Sep 01, 2005 4:55 am
Location: Cape Cod, MA

Splitfire Pro

Post by T Whalen » Mon Oct 02, 2006 12:52 am

Just went to the AP website and saw the Pros with the spherical hanger bearing.

What's the feedback from people who've ridden them?

Terry
Top
Post Reply

Return to “Split-Fire”