Splitfire First generation

Dave Gale · Post by **Dave Gale** » Sat Dec 09, 2006 4:40 am

Hmmm... longer axels would be nice tho, huh? I have only 2 narrows and 1 or 2 129's. I'll probably email or call you tomorrow..Like to chat witcha.

Dave Gale · Post by **Dave Gale** » Sat Dec 09, 2006 4:38 am

You know it! Got 3 or 4 o' them, on Indy plates!

Chris Favero · Post by **Chris Favero** » Sat Dec 09, 2006 4:23 am

Dave,was it "geezerized"?i love my geezer ttc.if you can get one,do so.cf

Dave Gale · Post by **Dave Gale** » Sat Dec 09, 2006 3:35 am

If you have your's run out prety far.(as the one shown) make sure that lock nut is snugged up good! I learned the hard way in 2002 on a TTC that they can, and will "pop" out!! Ground a bit of nose off(luckily the deck and not mine) Although it was a Turner, not one of my older ones atleast.

Luke Melo · Post by **Luke Melo** » Sat Dec 09, 2006 2:16 am

thanks. im not going to adjust it because it feels good to me.

Jim Weatherwax · Post by **Jim Weatherwax** » Fri Dec 08, 2006 2:05 pm

that is a jam nut...adjust the pivot to the proper depth, then crank that nut down and it locks down the pivot

Luke Melo · Post by **Luke Melo** » Fri Dec 08, 2006 5:14 am

i have a first generation splitfire rear on an orion baseplate. i was wondering what this peice does.

(this isnt my truck, but it has the same thing)

does it just keep the peice that goes into the pivot cup in the hanger?

Join the ISSA 25-cone series. 5 international sessions per year.
Create your own local race. Discover slalom skateboarding now!

| World Ranking | 25-cone Series | Calendar