Split-Fire Skateboard Trucks

Moderator: Gary Fluitt

Seismic - Bad ass slate technology


Postby Karl Floitgraf » Mon Dec 11, 2006 5:03 pm

I was wondering do I have to sell my DS 107 in order to buy a splitfire pro or can you upgrade an older truck?
Karl Floitgraf
Location: North America
Posts: 584

Postby Gary Fluitt » Wed Jan 17, 2007 5:48 pm

I don't do upgrades to the older model hangers. Sorry bro.
Gary Fluitt
Location: Colorado, USA
Posts: 328

Postby Eddy Martinez » Wed Jan 17, 2007 5:50 pm

Karl talk to Evan from DHB I believe he knows who can upgrade your truck. Your Amigo Eddy Texas Outlaws.
Eddy Martinez
Texas Outlaw
Texas Outlaw
Location: Harlingen, Texas
Posts: 714

Postby Adam Daniels » Wed Feb 28, 2007 4:46 am

as another good upgrade that costs only $2 and some elbow grease.........buy a delrin pivot cup from JimZ and shave a little off the height. then press it into your baseplate. put some grease, not lube, into the inside of the delrin cup and slide the hanger in with the bottom bushing in without the kingpin. you may have to shave the inside of the delrin cup a tiny bit because some are tight fit. that's a good thing though because after some riding it breaks in and rides super smooth with no flop. now put the kingpin in as well as the top bushing and nut.....BOOM. you now have a zero flop pivot. i did this to both of my red splits and the turning and reaction time is crazy!
No vestido para mi

Adam Daniels
Adam Daniels
Adam Daniels
Location: Albany, New York
Posts: 305

Return to Split-Fire