Pavel Slalom Boards
Moderator: Donald Campbell
-
Pierre-Yves Ritschard
- panda
![panda panda](./images/ranks/PierreRitschard.JPG)
- Posts: 48
- Joined: Fri Sep 26, 2003 2:00 am
- Location: Paris, France
Post
by Pierre-Yves Ritschard » Thu Sep 07, 2006 1:42 pm
Hi,
I recently purchased this deck:
the pavel freerider.
I find the wheelbase a bit short, and from what i can see through google translate (my german is a bit rusty) drilling new holes would allow me to have a better behaving slalom board.
What re-drilling do you recommend, should I drill using the back holes as front holes and only drill 2 new holes or will that be too far back (and too much on the tail of the board, I'm afraid I'm gonna have to use a huge amount of wedged pads).
any recommendations from the pavel folks ?
TIA
-
Heiko Schöller
- Heiko
![Heiko Heiko](./images/ranks/HeikoScholler.gif)
- Posts: 228
- Joined: Wed Jan 07, 2004 3:58 pm
- Location: Köln-Germany
-
Contact:
Post
by Heiko Schöller » Fri Sep 08, 2006 1:37 am
Hi Pierre
Ah this is my pic. Yes the WB is really short. It´s 17". If you need a cheap board for Tight Slalom the deck is really good. Just drill 2 new holes in the back of the board and you can go for it. This board doesn´t have a real Tail so no big wedging...I think this should work.
-
Claude Regnier
- Claude Regnier
![Claude Regnier Claude Regnier](./images/ranks/ClaudeRegnier2.gif)
- Posts: 1189
- Joined: Mon Sep 16, 2002 2:00 am
- Location: Cornwall, Ontario, Canada
-
Contact:
Post
by Claude Regnier » Fri Sep 08, 2006 4:59 pm
Heiko!
Post that pic I sent you to show them the Dagger Model workds well in a Bowl as well.
Many Happy Pumps!