Pavel Freerider

Pavel Slalom Boards

Moderator: Donald Campbell

Post Reply
Pierre-Yves Ritschard
panda
panda
Posts: 48
Joined: Fri Sep 26, 2003 2:00 am
Location: Paris, France

Pavel Freerider

Post by Pierre-Yves Ritschard » Thu Sep 07, 2006 1:42 pm

Hi,

I recently purchased this deck: Image

the pavel freerider.
I find the wheelbase a bit short, and from what i can see through google translate (my german is a bit rusty) drilling new holes would allow me to have a better behaving slalom board.

What re-drilling do you recommend, should I drill using the back holes as front holes and only drill 2 new holes or will that be too far back (and too much on the tail of the board, I'm afraid I'm gonna have to use a huge amount of wedged pads).

any recommendations from the pavel folks ?

TIA

Heiko Schöller
Heiko
Heiko
Posts: 228
Joined: Wed Jan 07, 2004 3:58 pm
Location: Köln-Germany
Contact:

Post by Heiko Schöller » Fri Sep 08, 2006 1:37 am

Hi Pierre

Ah this is my pic. Yes the WB is really short. It´s 17". If you need a cheap board for Tight Slalom the deck is really good. Just drill 2 new holes in the back of the board and you can go for it. This board doesn´t have a real Tail so no big wedging...I think this should work.
WWW.CONCRETEWAVE.DE
100% Skateshop and no fucking fashion store. GOG homebase.
WWW.PAVEL-SKATES.COM
Pavel über alles
ASSA = Anti Skateboard Slalom Association

Pierre-Yves Ritschard
panda
panda
Posts: 48
Joined: Fri Sep 26, 2003 2:00 am
Location: Paris, France

Post by Pierre-Yves Ritschard » Fri Sep 08, 2006 8:55 am

yes the pic is from concretewave.de, thanks for the info.
i will drill the 2 holes.

Claude Regnier
Claude Regnier
Claude Regnier
Posts: 1189
Joined: Mon Sep 16, 2002 2:00 am
Location: Cornwall, Ontario, Canada
Contact:

Freedrider

Post by Claude Regnier » Fri Sep 08, 2006 4:59 pm

Heiko!

Post that pic I sent you to show them the Dagger Model workds well in a Bowl as well.
Many Happy Pumps!

Post Reply