Hi Jani,
The only one I see that resembles it is the Hill Killer. Is that the one you're referring to?
I basically did the shape free hand based on my preferred foot position so I dont even know the specs but I can measure it up and compare... I am not surprised though as it is a really functional shape and I have grown to love this board in the short time I have had it and will definitely make more based on the same idea. When I have some more time , I will perhaps do some variations on the solid chunk approach such as fluted wings and such to cut the weight a little. On the subject of weight...I have found that a heavier board has not really affected the performance at, except perhaps that it's a little slower out of the gate.
As a point of interest...The old Logan earth solid jobbies...what was the deck thickness. Would anyone know? Or does anyone on the boards who is more experienced have any advice or comments about solid boards in general?
Thanks in advance
My new buddy!
Moderator: Marion Karr
-
Jon-Pat Myers
- Faster!
- Posts: 10
- Joined: Thu Jun 15, 2006 5:42 pm
- Location: Earth
- Contact:
-
Jani Soderhall
- ISSA President 2011-2024
- Posts: 4702
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
-
Justin Pannulla
- Justin Thyme
- Posts: 142
- Joined: Tue Feb 01, 2005 1:59 am
- Location: Philadelphia P.A.
-
Jon-Pat Myers
- Faster!
- Posts: 10
- Joined: Thu Jun 15, 2006 5:42 pm
- Location: Earth
- Contact:
Images
Thanks to Jani for helping out!
Here are two images....
Cheers!
Here are two images....
Cheers!
-
Jani Soderhall
- ISSA President 2011-2024
- Posts: 4702
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Re: My new buddy!
You can always email me images you want to upload, I'll post then on the server and give you the link to include in your post.Jon-Pat Myers wrote: As I havent been able to succesfully post the image you will be able to see them at the WFSA friends of freestyle forum.
janiATslalomskatebaorder.com
/Jani
-
Jon-Pat Myers
- Faster!
- Posts: 10
- Joined: Thu Jun 15, 2006 5:42 pm
- Location: Earth
- Contact:
My new buddy!
I snapped my old slalom board doing a kickflip!.... I know, I know...
So I took a solid piece of oak and CARVED me a new board!!
It has a 75mm concave or more like spooncave as it shallows out toward the rear. The risers are basically part of the board and the bottom is beveled down to reduce the weight factor.
Contrary to my expectations it turns out to be one of the best all round boards I have ever ridden. Ultra stiff as you can imagine and a little on the heavy side but shockingly stable at speed and responsive in the tight dept.
As I havent been able to succesfully post the image you will be able to see them at the WFSA friends of freestyle forum.
I will post the link as soon as.
Your comments/questions are most welcome
So I took a solid piece of oak and CARVED me a new board!!
It has a 75mm concave or more like spooncave as it shallows out toward the rear. The risers are basically part of the board and the bottom is beveled down to reduce the weight factor.
Contrary to my expectations it turns out to be one of the best all round boards I have ever ridden. Ultra stiff as you can imagine and a little on the heavy side but shockingly stable at speed and responsive in the tight dept.
As I havent been able to succesfully post the image you will be able to see them at the WFSA friends of freestyle forum.
I will post the link as soon as.
Your comments/questions are most welcome