HOLL28.25 Model by Roe

Roe Slalom Boards

Moderator: Gareth Roe

Post Reply
Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Wed Aug 27, 2003 6:44 pm

For those of you that know I once had a board that was made for me by Robin Lloyd. He told me he could make any shape I wanted. The result was a blunt nosed board that I loved. After riding slalom for two years I made a template for Gareth to create a new updated version of this board. The result is pure perfection for tight slalom.

To view the board go to: http://homepage.mac.com/garyholl then hit the "garys sponsors" page.

Here are the stats on this board:
The overall length is 28.25".
The width is 8.5".
The camber height is 3/8.
The wheelbase is 19" (measured inner hole to inner hole).

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Thu Sep 04, 2003 6:20 pm

I just added more photos of this board set up....same link as above.

Post Reply