The New line

Roe Slalom Boards

Moderator: Gareth Roe

Post Reply
Brian Morris
Posts: 157
Joined: Fri Oct 18, 2002 2:00 am
Location: Hawthorne, NJ
Contact:

Post by Brian Morris » Fri Jul 04, 2003 2:49 am

So when are we gonna see the website up, and more of the new boards? I plan on ordering a deck soon, and I want to check out Everything...


Brian

Jens Björnsson
Posts: 8
Joined: Thu Jun 26, 2003 2:00 am
Location: Sweden

Post by Jens Björnsson » Fri Jul 04, 2003 12:08 pm

I agree, the Site has been down too long by now.

Sam Gordon
Sam Gordon
Sam Gordon
Posts: 582
Joined: Wed Dec 11, 2002 1:00 am
Location: London UK
Contact:

Post by Sam Gordon » Wed Sep 17, 2003 2:47 pm

If the website is still in the development stage, then one feature that might be included would be the capacity to overlay the line-drawings of each deck with another. If the front truck mounting point was used as a centre marker, then a potential customer could compare and contrast foot spacing distances and areas with those with which they are already familiar. This facility would help with deck selection especially where a specific is required such as even width or wide tail for example.

Gareth Roe
RoeRacing Team Captain
RoeRacing Team Captain
Posts: 138
Joined: Wed Aug 28, 2002 2:00 am
Location: Seattle, Washington
Contact:

Post by Gareth Roe » Wed Sep 17, 2003 5:59 pm

Sam-
That is a great idea. We built "Trading Cards" of each deck and it would be easy to do something similar to what you suggested with the artwork that we developed for the Cards. The Trading Cards can be seen on this site under each of the 2003 board names. It would be relatively easy to overlay all of the shapes on one graphic. Maybe using different color line art for each deck.

We are working on getting the web site back up and running. However, my HTML skills and lack of time have been a huge hindrance in rebuilding the site. After the “Worlds”, I hope to have some time and some help in getting the site back up and running.

Thanks for everyone’s patience with the website. I can always be reached at info@roeslalom.com if you have questions about the decks or if you want to place an order.
Sincerely-
Gareth

Guest

Post by Guest » Wed Sep 17, 2003 6:36 pm

<center><img src="http://homepage.mac.com/ur13/roe/roe.gif" border="0"><br><br>
Does this help?
<b>Unlimited 03 - Crossfire - Bottle Rocket</b>
260k that will entertain you for hours.
</center>



<font size=-1>[ This Message was edited by: Chris Stepanek on 2003-09-17 12:40 ]</font>

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Wed Sep 17, 2003 10:58 pm

chris, that's cool.

Gareth, that would be a great feature.


show me the holl28, holl31 and holl34 trading cards!

Slappy Maxwell
Posts: 343
Joined: Mon Dec 02, 2002 1:00 am
Contact:

Post by Slappy Maxwell » Thu Sep 18, 2003 12:53 am

That is cool.

Another helpful way of looking at it might be just an outline of the top deck surfaces altogether as an overlay but color coded (i.e. unlimited outlined in red, bottlerocket outlined in green, crossfire in blue, etc)

Sam Gordon
Sam Gordon
Sam Gordon
Posts: 582
Joined: Wed Dec 11, 2002 1:00 am
Location: London UK
Contact:

Roe Website

Post by Sam Gordon » Thu Oct 23, 2003 4:30 pm

In addition, would it be possible to include details of the typical recommended wheelbase for each deck? For example, There are little clues as to the design purpose between the Holl 31" and the Bullet. Both look good, but would one be better suited to 'hybrid' or short-spaced GS than another? ...and which shape was designed by a rider of what weight, age and skating-style? Umm... that might be Too Much Information, but it all helps in the decision making process, especially given the style departure of the current Hollein Signature decks.

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Roe info

Post by Gary Holl » Thu Oct 30, 2003 6:28 pm

Hi Sam, I agree that would all be great info...for now here are the specs to my 31" board:
The overall length is 31".
The width is 8.75".
The camber height is 3/8.
The wheelbase is 20.75 (measured inner hole to inner hole).
Flex ranges: Medium 120-160lbs. Rider weight.
Medium Stiff 160-190
Stiff 190-220lbs
Extra Stiff over 220 lbs.

I use a Stiff or Extra Stiff, I weigh in at 185, I'm 6" tall and my background includes 27 years of skateboarding.....street, flatland (freestyle), vert, pools and yes of course slalom.

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Thu Oct 30, 2003 11:50 pm

I'm 190 and ride the Crossfire(mini bullet) in a stiff lay up. The board works best in flat to Low pitch courses that are anywhere from 5 foot on center with slight offset to 6 and 7 on center with a foot of offset. Also works very well in steep pitch ts and hybred so long as there are no crazy offsets. This is a deck you can power into and get mad acceleration. For more Offset courses go with an S camber if its tight and big offsets or a med flex Unlimited or holl so you can flex the tail and bring it around. This is what I should have ridden Sat in Morro Bay. For Boarder X the Holl34 is nice and I ride that in a stiff/x Stiff lay up. This deck could also be ridden on a hybred course but I would go down to a med flex. TK

Sam Gordon
Sam Gordon
Sam Gordon
Posts: 582
Joined: Wed Dec 11, 2002 1:00 am
Location: London UK
Contact:

Images of the Recent Roe productions under discussion:

Post by Sam Gordon » Fri Oct 31, 2003 11:20 pm

Image Image Image
Gary Holl models 28.25," 31" and 34"

Image
Roe Unlimited PS 30"

Image
Roe S-Camber PS 28"

http://www.daddiesboardshop.com/images/ ... ssfire.gif[/img]
Roe CrossFire 28"

Thanks gentlemen, it is helpful!

Gareth Roe
RoeRacing Team Captain
RoeRacing Team Captain
Posts: 138
Joined: Wed Aug 28, 2002 2:00 am
Location: Seattle, Washington
Contact:

RoeRacing Slalom Skateboards

Post by Gareth Roe » Sat Nov 01, 2003 9:49 am

Sam-
incredible! - THANKS!!!!!!! I have been wanting to do that for the longest time!

We will get our website updated as soon possible and then all of the boards and their specifications will be posted in one place. Until then, check back right here for the latest RoeRacing news.

Later-
Gareth
RoeRacing Slalom Skateboards
info@roeslalom.com

Dan Mitchell
Posts: 214
Joined: Mon Oct 28, 2002 1:00 am
Location: York, PA
Contact:

PS Decks

Post by Dan Mitchell » Thu Nov 06, 2003 1:32 am

Hi all,
I'm looking at two Roe PS decks, the Unlimited and the Crossfire. All the online vendors that I was able to find listed the flex as "MED/STIFF" or "ONE FLEX".
Now, being a bigger guy, I'd like these decks as stiff as possible.
Do I need to contact Gareth directly?
Can the vendors help?
How stiff do I need?
If anyone can point me in the right direction I'd appreciate it.
Thanks
Dan Mitchell, aka PA Dan

Tod Oles
Lone Stranger Racing
Lone Stranger Racing
Posts: 375
Joined: Wed Jun 25, 2003 2:00 am
Location: Blanco, Texas
Contact:

Post by Tod Oles » Thu Nov 06, 2003 2:59 am

Dan,

I have a PS Unlimited and after 2 months I'm still in love with this deck! I'm generally pretty fickle.
I hover around 195lbs and have found this deck in the Med/Stiff to really eat up offsets in hybrid TS set on moderate slopes. It works quite well at
cyberslalom also, I've dug a few lucky 9 second runs out of it. this maybe where a Crossfire should take over at anything tighter.
I run it with Siesmics and 80a Avalons.
The fuller shape affords alot of stance options also. I think it"s one of those "if you can only have 1" kind of boards.
I patronized Asphalt Playground for the deck and ToyandSport
for everything else. Great service from both!

hope that helps a bit, Tod

P.S. If you get a Crossfire let me know how you like it. Thanks

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Mon Nov 10, 2003 8:28 pm

Dan, I can try and help you on the decks. I've been helping Palo Alto Sport Shop, http://www.toyandsport.com/slalom.html , by answering questions on various decks for their customers. The PS Crossfire feels comfortable in a med/stiff when I've tried them and I'm around 185.

Contact Eric at 650-328-8555 at Palo Alto Sport Shop or visit them on-line at the above link. See what he has in stock. You can e-mail him via the contact link on the site. I will e-mail him and tell him that you may contact him and to offer you free shipping (USA only, not HI or AK) on any of the Roe PS decks in stock should you decide to purchase one.
I think they have both the unlimted and crossfire PS in stock.

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Tue Nov 11, 2003 5:24 am

Dan how much do you weigh? What type of courses do you want the deck for? Are you a pumper or a steerer?

Dan Mitchell
Posts: 214
Joined: Mon Oct 28, 2002 1:00 am
Location: York, PA
Contact:

Post by Dan Mitchell » Tue Nov 11, 2003 9:08 pm

I'm about 210-220, sometimes 225
The unlimited is to replace my Turner GS/H for an "all around" deck.
The Crossfire will be for TS.
I got a Chicken wing recently and really like the fuller shape.

I thought I was a pumper, but after seeing some really awesome racers, I don't know :)
Dan Mitchell, aka PA Dan

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Tue Nov 11, 2003 11:57 pm

Hey Dan, I'll give you my 2 cents and TK can add to it.

With your size I think the unlimited is a great board, get it in stiff. I think PA Sport has one. I used to ride the turner GS/H for everything and when I switched to the fuller Unlimited I couldn't believe the difference in terms of acceleration and control. This will be a great all around board.

The Crossfire will make a great TS board. I haven't spent much time one one perhaps TK can comment. You'll want this in stiff or maybe even the extra stiff.

-gary-

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Wed Nov 12, 2003 4:10 am

Dan, get a PS Unlimited in a stiff flex if you want it for a ts deck. For hybrid or GS go with the stock flex.
The X Fire is a winner. Everyone who has one loves it. Roes tend to run stiffer in flex than most brands so a med is really like a med stiff.

I have the x fire and its a really good functional ts shape. Raced it at the worlds and it was perfect. Get a pair. You can buy 2 PS decks for the price of one Foam. TK

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Wed Nov 12, 2003 5:34 pm

Dan, if your interested I can work out a discount on two decks at Palo Alto Sport Shop...assuming they have what you want in stock.
e-mail me I know the owners and they have PS Unlimited and Crossfire's in stock.

-g-

11/13/03 Palo ALto SPort Shop now only has one PS unlimited in a medium/stiff and one PS Crossfire med/stiff in stock...I know a few people have e-mailed me regarding these boards....if you want one don't delay...when they are gone they are gone......well until next spring.
-g-

11/13/03 1:05PM Looks like Dan wants the two boards so everyone else that asked about them please note they are sold. Palo Alto Sport Shop can still take your order but your order will take a a week+ to fill and the price will be full retail.

Dan Mitchell
Posts: 214
Joined: Mon Oct 28, 2002 1:00 am
Location: York, PA
Contact:

Post by Dan Mitchell » Mon Nov 17, 2003 1:38 am

Thanks to everyone who offered advice, and to Gary for hooking me up.

I gotta say, it is so cool to be able to slalom again. Prior to the 1st DC series, my last race was in 1978.

We should all be thankful we are even doing this!!
I know I am.
Dan Mitchell, aka PA Dan

John Gilmour
Team Roe Racing
Team Roe Racing
Posts: 1207
Joined: Tue Aug 27, 2002 2:00 am
Location: USA

SSSS-CCCC-AAAA-MMMM-BBBB-EEEE-RRRR....Dance

Post by John Gilmour » Mon Nov 17, 2003 3:37 am

Rode the new line of S-cambers- super super stick,

I'm not sure we will ever see a course in a competition where these will be pushed to the max.
One good turn deserves another
john gilmour

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Mon Nov 17, 2003 3:52 am

JG was wondering if there was a more narrow S camber than the two we had out today. There is . The Cut away tail model is more narrow than the fuller shaped cross fires. TK

Tod Oles
Lone Stranger Racing
Lone Stranger Racing
Posts: 375
Joined: Wed Jun 25, 2003 2:00 am
Location: Blanco, Texas
Contact:

Post by Tod Oles » Mon Nov 17, 2003 4:23 am

Terence,

Hope you guys had fun! Nothin but wet pavement here all weekend.

I've got a Crossfire shaped S-camber on the way and was wondering if
the Cutaway model was any different as far as wheelbase goes.
Did you or John find any magic combinations?

Thanks again, Tod

Steve Hopper
Insect - Roe Skateboards
Insect - Roe Skateboards
Posts: 22
Joined: Sun Oct 26, 2003 8:40 pm
Location: Seattle, WA, USA
Contact:

Crossfire and Cutaway dimensions

Post by Steve Hopper » Mon Nov 17, 2003 8:40 am

Yes. The Cutaway shape is narrower than the Crossfire. Here are the specs:

Crossfire - 28" x 8.25"

Cutaway - 28" x 7.75"

The "cut-away" of the Cutaway begins at 17" back from the nose and tapers back to 5.5" at the center of the rear truck (roughly).

Steve
"Your Humble RoeRacing Board Builder"

Eric Wallgren
Geezer-X
Geezer-X
Posts: 67
Joined: Tue Jan 07, 2003 1:00 am

Roe Quiver.

Post by Eric Wallgren » Mon Nov 17, 2003 9:21 pm

Not something that goes on top of your sushi.

I agree with whoever it was who said to get an Unlimited and a X fire. I got an Unlimited prototype which had been made for UR13, super stiff, very low camber, and drilled at like 17.5" to work w/ PVD R2s. It is EVERYTHING I've been looking for. I can push as hard as I can without fear of the chirp that becomes a huge gnarly hipper. The grip is beyond belief. The combination of the PVDs and this deck telegraph every nuance of the pavement like a perfectly set-up race bike. I can run harder, narrower wheels fearlessly.
The Crossfire is one of the red prototypes Gareth was selling on the cheap last winter. I rode it w/ PVDs 'til I got the Unlimited. Now it's set up with an RTX front and TTC rear, both with 8mm axles and longer kingpins. Various Tracker bushings, usually cut Stimulators and soft or medium conicals. Cambrias or Avalons.
At this point I'm in the enviable position of having 2 setups that are so flexible and ridable that I can look at the hill and be really close to optimal with just bushing and wheel choice, and I haven't had a truck off in months.

Unlimited

Crossfire

Buy both. Be happy.

Gary Holl
Roe-Racing
Roe-Racing
Posts: 102
Joined: Thu Aug 29, 2002 2:00 am
Location: CA, USA
Contact:

Post by Gary Holl » Fri Nov 21, 2003 9:12 pm

I screwed up, Palo Alto Sport Shop does have one more PS Unlimited in a Medium/Stiff for sale. contact me directly at garyholl@mac.com if your interested in this fine board. I can work out a deal with the owners if your interested.

Post Reply