FootStop Designs released by PSD - in ABS Plastic

Bushings - Pivots - Speed Rings - Traction etc

Moderator: Henry Julier

Seismic - Bad ass skate technology

FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Thu Apr 28, 2011 7:23 am

There are 3 designs of FootStop available on the PSD website. They are made from ABS plastic and produced using a rapid prototyping process. They're strong and light.

The website now includes photos, reviews and more information on the designs.

Custom FootStop designs are possible. Please contact me if you want something specific!

Cheers, Tim.

www.pritchardskatedesigns.com

Image
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Mon Jun 13, 2011 12:38 pm

The flagship PSD FootStop model, the black FWD+, is now back in stock. The other models are also available, check the website for more details and colours.

This is a picture taken for the Noteworthy section in Concrete Wave Magazine. I really can’t wait to see this photo in Concrete Wave, it’s going to be one special day!

Image

http://www.pritchardskatedesigns.com
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Fri Jul 01, 2011 2:03 pm

There's been quite a lot going on with PSD in the past few weeks. There is now a FaceBook "Page" that you can Like and keep updated with PSD news. Just go to the PSD website homepage and the FaceBook link is there.

I now also have a YouTube account to post the PSD videos.

Plus, I've just received some FWD+ models in a bright Sky Blue colour!

There are 3 designs of footstop available, check the website for more details: www.pritchardskatedesigns.com

Image
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Wed Jul 06, 2011 12:43 pm

PSD has made it into Concrete Wave Magazine!

Check Summer 2011 Volume 10 Issue 1, page 36.

Image


Visit the site to get in contact with me, link up with me on FaceBook and Youtube, and place orders for the FootStop's. www.pritchardskatedesigns.com
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Mon Aug 01, 2011 12:55 pm

The most suitable footstop for slalom may well be the "Barrier" footstop. Easy to kick into your required position, of you leave the footstop loose. It bolts down with a single fixing hole for a very simple yet stylish footstop.

http://pritchardskatedesigns.wordpress.com/footstop-the-barrier/

Image
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Thu Sep 08, 2011 8:11 am

Hey hey!

I've setup my board ready for the Bath-to-Bristol charity skate, and fitted everything PSD I could.

Front prototype light bracket (I've since made this much stronger), nose guard, footstop, rear light bracket, tail guard, a new front light bracket on the back with a water bottle fixed to it, and a PSD flag coming out of the rear light bracket. The flag is on a slightly flexible pole, so it should sway with the pumps! It's sure to catch the eye of a few people! Can't wait.

The light brackets are not officially on sale yet, but please get in contact with me if you’re interested. The front bracket is getting further testing this weekend!

Image

Image

Image
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Ron Barbagallo » Fri Sep 09, 2011 2:03 pm

awesome!!

Well done, sir!
Evil Potentate
Team Fatboy - all hopped up on goofballs!

Still douchebags, but CLASSY douchebags ;)

UNDISPUTED WORLD CATAMARAN CHAMPS!
Ron Barbagallo
Fatboy
 
Location: Jersey
Posts: 757

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Wed Jan 21, 2015 1:43 pm

PSD footstop update:

PSD footstops have now been in full production since January 2013 with two designs, the IN-Side and the OUT-Side, both manufactured and distributed by RipTide in America.

The PSD footstops are no longer made using rapid prototyping and are no longer made from ABS plasti. You'll be pleased to hear that the RipTide made PSD footstops are made from a 60D urethane (harder than 95a) which means that it has just enough flex to form to your deck but remains grippy and hard wearing. Both footstop designs are now 25mm tall, they still feature the PSD grip surface and are now available in a range of colours.

PSD footstops are now available all over the world and from all of the big websites including Sk8Kings, Muir, Daddies, Newton’s Shred, OctaneSport, Sickboards, Stoked, Longboardshop.de, concretewave and now even Amazon.

Sk8Kings Link: http://www.Sk8Kings.com ----------- http://www.sk8kings.com/Merchant2/merch ... e=SKRIP101

PSD website: http://www.SkatePSD.com

Riptide website: http://www.riptidesports.com/psd-footstops
Tim Pritchard
 
Location: Coventry - England
Posts: 23

Re: FootStop Designs released by PSD - in ABS Plastic

Postby Tim Pritchard » Thu Jan 22, 2015 1:40 pm

There is a PSD FaceBook page. Keep up-to-date with the PSD news feed and new designs: https://www.facebook.com/pages/Pritchar ... 1525696841
Tim Pritchard
 
Location: Coventry - England
Posts: 23


Return to Hardware & Bushings