Metal Angled Risers

Bushings - Pivots - Speed Rings - Traction etc

Moderator: Henry Julier

Post Reply
Michael Stride
Octane Sport (RIP)
Octane Sport (RIP)
Posts: 594
Joined: Sat Jul 12, 2003 2:00 am
Location: UK
Contact:

Metal Angled Risers

Post by Michael Stride » Sun Mar 22, 2009 6:56 pm

We are making risers to match the Virage trucks. We are doing production 3 and 5 degree wedges with a thin end (thinner than the picture). The rear holes are designed to be elongated to allow for bolts going through an angled baseplate.

Whilst these are designed to match the Virage we didnt copy the actual baseplate shape at the sides, this is so they will match a variety of trucks, in fact the outer shape matches very closely those of a Tracker.

We can also make any sized riser to any depth, so if you have a stack of risers on your deck we can take those diemsions and angles and replicate it with one, stiff, aluminium riser. However, I do like to run with 1/8th" soft khiro riser under the deck just to add a touch of dampenning.
Image
Image

Marty Schaub
Old LaCosta Boy
Old LaCosta Boy
Posts: 523
Joined: Thu Feb 10, 2005 5:43 pm
Location: Dacula, JoJa

Hey!!!

Post by Marty Schaub » Sun Mar 22, 2009 8:54 pm

As they say here in the south...

Them shore R purrrdddyyy....

Nice work.
La Costa Boy For Life

Post Reply