PVD R3's

Terry Kirby · Post by **Terry Kirby** » Sat Jul 05, 2003 5:16 am

Anyone have a set they want to sell?

Guest · Post by **Guest** » Sat Jul 05, 2003 3:44 pm

hahahahaha...TK you KNOW all 11 people who have a set. I can think of maybe 1 or 2 that would part with them.

Terry Kirby · Post by **Terry Kirby** » Sat Jul 05, 2003 4:19 pm

Someone must need the money!

Alan Schroeder · Post by **Alan Schroeder** » Tue Jul 08, 2003 12:47 am

TK,
Got a set of used R2's for sale? Anyone?

Terry Kirby · Post by **Terry Kirby** » Tue Jul 08, 2003 3:12 am

Shaggy, I will sell my R2's as soon as I know the R3's will be made again. I talked to Peter and he said the next run will be soon. If you want in on my R2s for a good price email me. TK

Nathalie Lauterbach · Post by **Nathalie Lauterbach** » Tue Jul 08, 2003 10:25 pm

Excuse me, it sounds quite embarrasing... but still... what are R2'S?
What kind of axle is that?
I might now but don't recognise them by their name.
Thank you and sorry for stupid questions

Jens Björnsson · Post by **Jens Björnsson** » Tue Jul 08, 2003 10:38 pm

The PVD truck is a Peter Verdone design. http://www.peterverdone.com/groundeffectold.htm The R2 stands for, I guess, second edition. No questions are stupid.

[ This Message was edited by: Jens Björnsson on 2003-07-08 16:41 ]

Nathalie Lauterbach · Post by **Nathalie Lauterbach** » Wed Jul 09, 2003 11:40 am

Thank you.
Ach yes the very expensive super mega truck

Got it...
Nevermind.
Bara bra.

N.

Vlad Popov · Post by **Vlad Popov** » Wed Jul 09, 2003 5:36 pm

Shaggy,

R2s in exchange for a 158?

You have more then you need. Give it up. NOW!

Alan Schroeder · Post by **Alan Schroeder** » Wed Jul 09, 2003 9:38 pm

Vlad, you're right, I do have enough for me, but my wife is now a MADD rider too!

Vlad Popov · Post by **Vlad Popov** » Wed Jul 09, 2003 10:01 pm

Good for her.

Damn!

Guest · Post by **Guest** » Wed Jul 09, 2003 10:05 pm

Vlad...I have a set of Indy 101s I'll trade you for one of your skinny Doneks!

I'll even throw in some good tracker bushings to sweeten the deal.

:razz:

William Tway · Post by **William Tway** » Wed Jul 09, 2003 10:27 pm

Not only is Shaggy's wife a MADD rider, she is the official team slacker Capitan.

No fees
No dues
No Meetings

Terry Kirby · Post by **Terry Kirby** » Wed Jul 09, 2003 11:39 pm

Is it true Gilmour designed the greatest carving board of all time then only made 5 of them? That is soooooo Gilmour

Vlad Popov · Post by **Vlad Popov** » Thu Jul 10, 2003 1:37 am

On 2003-07-09 16:27, William Tway wrote:
Not only is Shaggy's wife a MADD rider, she is the official team slacker Capitan.

What? Woman - captain?! What kind of team are you, team Slacker? Send back your PlankkR immediately! Return postage will be paid by a man-operated company. We have a girl on our team, but never will we allow a woman to be our captain! May God make every woman as beautiful as Cheri, but may HE always keep men in power!!!

Real men don’t allow girls to rule!

Men Power!

Power to Men!

PlankkR!

Vlad Popov · Post by **Vlad Popov** » Thu Jul 10, 2003 1:44 am

On 2003-07-09 16:05, Chris Stepanek wrote:
Vlad...I have a set of Indy 101s I'll trade you for one of your skinny Doneks!

I'll even throw in some good tracker bushings to sweeten the deal.

:razz:

You are joking, but in fact CMC and I can't sell those boards. Everyone rides those wide boards nowadays. It takes a man to get on a narrow-waisted bitch such as 175 Vlad/CMC model Donek. When tamed it's one of the most rewarding rides. But who's got the balls to work the board? Most of the modern carvers are wide-freestylboard-riding girls.

Cheri Schroeder · Post by **Cheri Schroeder** » Thu Jul 10, 2003 6:32 am

Vlad, I think your beautiful too and other than that, team slacker doesn't think that much about anything.

cc/Tway

Alan Schroeder · Post by **Alan Schroeder** » Thu Jul 10, 2003 7:09 am

TK, you're right about JG designing the all time ultimate carvin' machine, the MADD 158! It fits him to a "T". Thats why MADD made 150 of the 58's! Only 8 170's and 2 180's were made (JG, please correct me if I'm off). All produced almost 10 years ago! Still at the top of any carvers' list of "must have"!

William Tway · Post by **William Tway** » Sat Jul 19, 2003 4:48 pm

Wanted: A set of R-2's or R-3's. Will pay top dollar.

Also will consider a trade for a complete timing system.

I am a believer!

John Gilmour · Post by **John Gilmour** » Sat Jul 19, 2003 6:03 pm

Madd Mike has another 158 for sale. Shaggy has his number.....it is brand new in the plastic.

I did product testing on the Madd line and helped to fix some design flaws- mostly delamination issues (the original ones used common closed cell packing foam in the tips!) and insert issues. I also pushed to extend the top sheets. Shaggy has his numbers correct. I also helped to dial in the sidecuts and flex patterns some of which were really way off (nearly unrideable)in the beginning.

You guys should all come out snowboarding...I can snowboard a lot better than I can skateboard and could coach you slackers to rip...I did help coach CMC, and others.

Want to really feel what a GS turn should feel like? Vlad knows.

TK bought my R3's last night- sold them to pay Peter...not Paul.

[ This Message was edited by: John Gilmour on 2003-07-19 12:09 ]

Terry Kirby · Post by **Terry Kirby** » Sun Jul 20, 2003 3:24 am

Peter will be doing another run of his r3 trucks as soon as he lands in Ca. HE is in Tahoe now mountain biking with his wife and dog. Have your 200.00 deposits ready. You wont be dissappointed. Ask Tway. He rode a set belonging to Noah and freaked out. They are that good. Pete is also making taller plate so you don't have to stack risers if you like a tall ride. TK

Sean Dawkins · Post by **Sean Dawkins** » Sun Jul 20, 2003 2:41 pm

TK:

Call me this week re: r3's. 502-262-1238

SeanD

Barry Gourley · Post by **Barry Gourley** » Wed Dec 17, 2003 9:40 pm

Ive never seen any trucks like them ever!!!!! VERY COOL

Rick Stanziale · Post by **Rick Stanziale** » Thu Dec 18, 2003 1:11 am

TK - will he be selling them only in pairs? If so, would anyone like to split a pair?

John Gilmour · Post by **John Gilmour** » Thu Dec 18, 2003 3:47 pm

Ha! If Pete never did another run- it would be the Indy suspension truck saga all over again(1980's wanna win?- you'll have a better chance with suspension trucks). I'd rather see the playing field level.

Vlad Popov · Post by **Vlad Popov** » Thu Dec 18, 2003 5:50 pm

Rick, I'll split it with you. If they are being made.

Ride Green.

Gareth Roe · Post by **Gareth Roe** » Thu Dec 18, 2003 9:44 pm

I heard that Peter has given up on skateboard equipment and is now designing bicycles. But... I have also heard that PVD's may be available again! Hmmm....

Join the ISSA 25 cone series. One cyber race every second month!

Regular sessions allow newbies to join our community and discover slalom racing.

PVD R3's

PVD trucks are BADASS

PVD R3's