GeezerX Bennett

Gary Saenz · Post by **Gary Saenz** » Wed Mar 05, 2008 3:50 pm

GeezerX Modded Bennett. 100mm hanger width, 8mm axle, ball pivot, bushing spacer to run 2 regular barrel bushings. $75 shipped in the US of A. Paypal. Will put up a pic later today.

Rick Floyd · Post by **Rick Floyd** » Wed Mar 05, 2008 5:36 pm

I'll take it - no pic needed...let me know the PP addy, PM'd you just now.

-Rick

Gary Saenz · Post by **Gary Saenz** » Wed Mar 05, 2008 6:04 pm

Look like it's sold

Rick Floyd · Post by **Rick Floyd** » Wed Mar 05, 2008 6:27 pm

Gary Saenz wrote:Look like it's sold

Gary - you can email me through the link here in my profile.

-Rick

Toby Warg · Post by **Toby Warg** » Wed Mar 05, 2008 11:17 pm

Dang.

Tony Peters · Post by **Tony Peters** » Thu Mar 06, 2008 2:46 am

you will like it Rick, I just received my Geezer modded Indy 109 and it certainly does make a difference

Rick Floyd · Post by **Rick Floyd** » Thu Mar 06, 2008 3:44 am

Actually - someone else grabbed it before me.

I think I'm just going to buy a Bennet and send it out for Geezering.

Tony Peters · Post by **Tony Peters** » Thu Mar 06, 2008 4:27 pm

Rick Floyd wrote:Actually - someone else grabbed it before me.

I think I'm just going to buy a Bennet and send it out for Geezering.

if you are gonna do it do it fast when he runs out of material he's ceasing his skateboard machining business

Rick Floyd · Post by **Rick Floyd** » Thu Mar 06, 2008 5:33 pm

Tony Peters wrote:
Rick Floyd wrote:Actually - someone else grabbed it before me.

I think I'm just going to buy a Bennet and send it out for Geezering.
if you are gonna do it do it fast when he runs out of material he's ceasing his skateboard machining business

TP - can you email me his contact info?

Joe Iacovelli · Post by **Joe Iacovelli** » Thu Mar 06, 2008 5:57 pm

There is a guy in Quebec doing a similar job with the pivot and cutting the hangar down to 100mm. It's not as pretty as Geezer's, but it might be cheaper. He's working up a batch.

Wesley Tucker · Post by **Wesley Tucker** » Thu Mar 06, 2008 6:14 pm

Rick Floyd wrote:TP - can you email me his contact info?

motomoron (at) yahoo (dot) com

Gary Saenz · Post by **Gary Saenz** » Thu Mar 06, 2008 6:15 pm

I'm working with someone here in the states that is going to be doing Bennett mods. It's Ron over at Rockin Ron bearings. He's doing pool trucks right now and I've convinced him to do some Bennetts. He's got the axles on order. Don't know on the price yet but he does excellent work.

http://www.skatetechnology.com/trucks.html

Stéphane Fournier · Post by **Stéphane Fournier** » Thu Mar 06, 2008 8:21 pm

i am the guy of quebec to see it

http://www.silverfishlongboarding.com/f ... post930074

the truck ready end april, if you are interest mp or stepahne5@yahoo.fr
the truck comes with original bushing
[/img]

Chris Iversen · Post by **Chris Iversen** » Thu Mar 06, 2008 8:50 pm

Couple good choices from Canada now:

Stefou's with the ball pivot look good and have stock axles, looks like the way to go if you want a ball pivot, but are happy with 5/16" axles. Great price too!

If 8mm axles are your priority over ball pivots, check out www.speed-dealer.ca (Canadian as well). They ship with a CNC'd tower bushing to allow a standard size bottom bushing such as a Khiro. They are more expensive than the ones with ball pivots, but axle mods cost more to do. Available in 76mm (ultra tight) 88mm, and 99mm. They also make rear offsets, which are a killer truk!!! Check 'em out!!!

Stéphane Fournier · Post by **Stéphane Fournier** » Sat Mar 15, 2008 1:32 am

i like this look

Join the ISSA 25 cone series. One cyber race every second month!

Regular sessions allow newbies to join our community and discover slalom racing.