ISSA - International Slalom Skateboarding Association

Modified Randals produced by Gary and Gib out of Colorado, I'm helping them out selling them because I spend way too much time in front of a computer. There are two different hanger versions available.

The R-II hangers were formerly 150mm. Now cut down to 95mm, spaceable out to around 125mm depending on the spacers used. Spherical bearing installed in the bushing seat. The front / top of the hanger has also been machined to allow better turning angles when running double barrel bushings. These will work fine for pumping if you like narrow RKP trucks.

The DH hangers are also machined down to 95mm, with a spherical bearing installed.

If anyone would like any additional / better photos, please contact me.

$47 US includes one hanger, and one 50 degree baseplate. You supply your own spacers, kingpin and bushings. Price also includes shipping to the USA.

If anyone absolutely needs spacers, kingpin and bushings, I might be able to be talked into supplying them for an additional cost.

R-II hanger, multiple angles:








And the DH hanger:

Hats off to Gary and Gib. I,ve been useing a cut down randal for a front truck for almost 4 years now w/o the spherical.
Ive personally love the way they turn when cut down. If your looking for a reasonably priced front end truck I personally recomend going with one of these randals. I've also riden Gibs hand built rear trucks, their awsom. Just one question Gib
when are they going on the Market???????? hahaha I remember our conversation about that.

Bump - Both R-II and DH hanger types now available.

¿How much for hangar only--no baseplate?

Update: currently sold out of the trimmed RII 150 hangers, only one DH hanger currently available.

Should have more in a couple weeks if anyone would like to "reserve" one.

H could you ship some in France ?

To those of you who have posted questions on this thread, I have replied via PM (In case you have not noticed...)

Bump-date:

I have both styles of hanger back "in stock"...

Should be no problem getting them shipped to folks in the US by Christmas if interested...

Can you ship to australia and do you sell the hanger only? I already have a 35* baseplate.

vincent tsui wrote:Can you ship to australia and do you sell the hanger only? I already have a 35* baseplate.

Sent you a PM Vincent.

Don't know if you got my last PM. I'm keen to buy but would like if you could source the spacers for me as well thanks. If you can please invoice me the total cost thanks. Also is the DH version better as a rear truck?

vincent tsui wrote:Don't know if you got my last PM. I'm keen to buy but would like if you could source the spacers for me as well thanks. If you can please invoice me the total cost thanks. Also is the DH version better as a rear truck?

I have not received an PM's from you, but have sent you another PM about spacers and your question about the DH hanger.

Bump - Still have trucks available.

Sold out of DH hangers for the time being.

Still have RII hanger with baseplates for sale.

PM'd

Bump - A few of the RII version still available.

Are any more DH hangers going be cut down? And is it possible to get a non-spherical version cut-down dh hanger with a 35 plate?

Jeffrey Newmark wrote:Are any more DH hangers going be cut down? And is it possible to get a non-spherical version cut-down dh hanger with a 35 plate?

DH hangers might be available in the future, but not right now.

All of the hangers already have the spherical bearing installed.

Only 50* plates available from me.

Curt Chapman wrote:Bump - A few of the RII version still available.

^^ What he said.

Sold Out...