http://sk8shop.ch/index.asp?spr=e
First generation Radikal look-alike:
![Image](http://sk8shop.ch/pictures/silver_space_professional.jpg)
This offset looks cool:
![Image](http://sk8shop.ch/pictures/noname_ostruck.jpg)
Carbon fibre base plate and shiny hanger!
![Image](http://sk8shop.ch/pictures/VIKING_truck125.jpg)
Anybody tried any of these??
Moderator: Terry Kirby
Hey Paul,Paul Keleher wrote:I have a pair of these trucks, bought direct from the www.sk8shop.ch
SNIP
also the base appears to be a standard G-truck. I'm not sure how well the "new models" will work with the Rt-X base, as i have investigated this with my own RT-x, and it would require a change in the Pivot angle from the G-truck ( which is very similar to indy 101). My only criticism is the Kingpin tends to rattle until its cranked down hard
on a plus side, the truck works very well and is machined superbly and it appears to have 8mm Axles as a bonus.....i have some lucky Abec 3 bearings which just won't fit on, yet my PT7's slide on nicely but with no "slop"
In my Case it made a viable Alternative to a TTC, which were no longer available.