Thanks Adam. Special thanks to HerbN from Skatewerks in Jersey for laying down the carbon and glass for me. Besides the carbon and glass on the bottom, there is wheel wells long enough for the original wheelbase and a second wheelbase drilled about a half an inch back.
Brian
Brain's Bahne..
Moderator: Stan Strocher
-
Brian Morris
- Posts: 157
- Joined: Fri Oct 18, 2002 2:00 am
- Location: Hawthorne, NJ
- Contact:
-
Adam Trahan
- Phoenix, AZ, USA
- Posts: 795
- Joined: Tue Apr 02, 2002 2:00 am
-
Jani Soderhall
- ISSA President 2011-2024
- Posts: 4702
- Joined: Thu Aug 22, 2002 2:00 am
- Location: Sweden, lives in France
- Contact:
Send an email to me at Jani@SlalomSkateboarder.com or Adam@SlalomSkateboarder.com and I or he will put the image on the site, then send you a link.
If you have a site yourself somewhere you can upload the image there and just link to it from here.
<font size=-1>PS. Please post topic specific posts in their appropriate forum, not to fill this one up too quickly. Thank's.
</font>
/Jani
If you have a site yourself somewhere you can upload the image there and just link to it from here.
<font size=-1>PS. Please post topic specific posts in their appropriate forum, not to fill this one up too quickly. Thank's.
</font>
/Jani
-
Brian Morris
- Posts: 157
- Joined: Fri Oct 18, 2002 2:00 am
- Location: Hawthorne, NJ
- Contact: