Gumballs

Abec 11 Skateboard Wheels

Moderator: Chris Chaput

Post Reply
Michael Dong
Posts: 59
Joined: Tue Nov 05, 2002 1:00 am
Location: Bothell, WA

Post by Michael Dong » Thu Aug 21, 2003 1:45 am

Here is a review I just posted on ncdsa:

It kills me to write this review because I'd love to keep these wheels all to myself but I feel that I owe it to Chris Chaput to let the cat out of the bag.

I am absolutely stunned. I recently rode on some prototype gumballs 81r, 88f. These are perfect wheels. Just freaking perfect. I wouldn't change anything about them. No cutdowns necessary. Perfect height to width ratio. Perfect lip flex both inside and out.

I ran a known GS course first with my Flashbacks. I then changed out to the Gumballs/Built-ins. I was expecting the tradeoff of less grip for the tremendous speed. Nope. More grip at much higher speeds. Took me about 4 runs to get them to slide after pushing harder and harder each run.

They turned so well that I had to run a cyberslalom on them to see if they would feel "heavy" through 6' centers and a short push start. I cybered directly after doing GS (tired). I ran an 8.27 cyber on Gumballs, and this was after running GS for about 1.5 hours solo.

These are very special wheels.

I also purposely loaded the built-in bearings in a sloppy fashion to test whether or not they would really "true" themselves if they were originally miss-aligned. Cranked them down nice and tight and they spun with absolutely no resistance. This was the same for all 4 wheels. Just slid the wheels on without dicking with the spacer and without dropping speedrings and cranked them down tight. It works. Its like a Formula 1 pit stop.

Robert Sydia
Robert Sydia
Robert Sydia
Posts: 179
Joined: Fri Nov 22, 2002 1:00 am
Location: Toronto, Canada

Post by Robert Sydia » Thu Aug 21, 2003 4:46 pm

Mike:

Could you post a pic of the Gumballs - can't find one anywhere, including ABEC 11 web-site.

What duro combinations would you recomend for different events (TS, Hybrid, Cyber).

Thanks

Rob

Michael Dong
Posts: 59
Joined: Tue Nov 05, 2002 1:00 am
Location: Bothell, WA

Post by Michael Dong » Tue Aug 26, 2003 2:27 am

Rob,

I wouldn't recommend these as the fastest wheels for cyberslalom or tight slalom, but for hybrid and GS these will be unbeatable. I predict they will change the way we set courses and have as big an impact on slalom as the first white Avalons. They may be the inertia needed to see real tight slalom at some of the bigger races where cone rates of 4 to 6 cones per second will preclude their use by anyone.

As far as duro, I have only ridden the 81r/88f combo. I think 84r/88f will be a good starting place but you may end up going softer to a 81r/84f.

Mark my words: Gumballs will change slalom racing and how we set courses from here on out. Simply amazing wheels.

Terry Kirby
Team RoeRacing
Team RoeRacing
Posts: 529
Joined: Thu Aug 22, 2002 2:00 am
Location: Hampton, NH USA

Post by Terry Kirby » Tue Aug 26, 2003 3:59 am

mike, how many pads do you need under the pvds to avoid wheel bite with the balls.T

Chris Chaput
Abec 11
Abec 11
Posts: 103
Joined: Fri Nov 08, 2002 1:00 am
Location: Huntington Beach, CA USA
Contact:

Post by Chris Chaput » Tue Aug 26, 2003 5:07 am

Image

Here's an image comparison with the Flashbacks.

The Flashbacks are 70mm tall, Gumballs are 76mm tall
The Flashbacks are 48mm wide, Gumballs are 53mm wide
The Flashbacks have a 43mm contact patch, Gumballs have a 49.5mm contact patch
The Flashbacks are sideset, Gumballs are offset
The Flashbacks are "barrel" shaped, Gumballs are "hourglass" shaped
The Gumballs are 28% heavier than the Flashbacks

Flashbacks slide more smoothly and predictably.
Gumballs are stickier and have a higher top end.

Michael Dong
Posts: 59
Joined: Tue Nov 05, 2002 1:00 am
Location: Bothell, WA

Post by Michael Dong » Tue Aug 26, 2003 6:52 am

TK -

I don't change the riser height from Flashback to Gumball. For both I use 5/8" risers with a Roe Bullet that has subdued wheelwells. I set my PVD hardstops with about 5/16" clearance to allow for board flex and I can hammer with confidence. I can't wait to race against Avilas with the Gumball/Built-in combo.

Chris Chaput
Abec 11
Abec 11
Posts: 103
Joined: Fri Nov 08, 2002 1:00 am
Location: Huntington Beach, CA USA
Contact:

Post by Chris Chaput » Tue Aug 26, 2003 8:29 am

Image
BTW, The Gumballs will be released in 75a, 78a, 81a, 84a and 88a. Limited production 72a versions for racers only.

We're about one week away.

Vlad Popov
Moscow-Washington
Moscow-Washington
Posts: 1543
Joined: Wed Aug 28, 2002 2:00 am
Location: Moscow, Russia
Contact:

Post by Vlad Popov » Tue Aug 26, 2003 9:30 pm

All this while I'm shaving NoSchools to make the quickest and fastest TS wheel.

Screw GS and SUPER FAG GS. Gimmi no Balls! Gimmi TS wheelz!

Or else!


:smile:

Chris Chaput
Abec 11
Abec 11
Posts: 103
Joined: Fri Nov 08, 2002 1:00 am
Location: Huntington Beach, CA USA
Contact:

Post by Chris Chaput » Tue Sep 09, 2003 6:09 pm

Vlad, You already have no balls. You've opened your legs, now open your mind.

Chris Chaput
Abec 11
Abec 11
Posts: 103
Joined: Fri Nov 08, 2002 1:00 am
Location: Huntington Beach, CA USA
Contact:

Post by Chris Chaput » Tue Sep 09, 2003 6:11 pm

Image
Image

Vlad Popov
Moscow-Washington
Moscow-Washington
Posts: 1543
Joined: Wed Aug 28, 2002 2:00 am
Location: Moscow, Russia
Contact:

Post by Vlad Popov » Thu Sep 11, 2003 12:48 am

I guess I'll have to buy me some Balls. Damn Capitalists!

Wes Eastridge
WesE
WesE
Posts: 566
Joined: Sun Sep 22, 2002 2:00 am
Location: northern Virginia, suburb of DC, USA

Post by Wes Eastridge » Thu Sep 11, 2003 8:32 am

How about a 70mm Gumball wheel for ‘regular’ GS?

Vlad Popov
Moscow-Washington
Moscow-Washington
Posts: 1543
Joined: Wed Aug 28, 2002 2:00 am
Location: Moscow, Russia
Contact:

Post by Vlad Popov » Thu Sep 11, 2003 3:09 pm

WesE wrote:How about a 70mm Gumball wheel for ‘regular’ GS?
I'll take 71 mm Gummballs please for Special Parallel GS.

Seth Levy
Posts: 254
Joined: Mon Nov 03, 2003 5:48 pm
Location: DC
Contact:

Post by Seth Levy » Mon Nov 24, 2003 6:45 am

has anybody used these wheels for a flat 6' slalom course? I am thinking of getting some, but i need to make sure they arent going to hold me back because i need all the help i can get! What is the best abec-11 wheel for a cyber slalom/flat slalom 6' course? Thanks!

Dan Mitchell
Posts: 214
Joined: Mon Oct 28, 2002 1:00 am
Location: York, PA
Contact:

Post by Dan Mitchell » Tue Nov 25, 2003 2:36 am

Seth,
I'd try Flashbacks in the 92 duro.

Has anyone else been disappointed with the Gumballs?

I got four 88a, four 78a and 2 84a.
At a recent DC Outlaw Bozi Longboard race, I had 88's all around. Grip was terrific, but the course didn't require exceptionally grippy wheels. I put 83mm 78a Flywheels on just the front and knocked almost a whole second off my time.
I put the four 78's on my Bozi Mad Bomber and they didn't feel near as fast as Flywheels, Flashbacks, or 3dm Avalons. I know there are guys who use them for racing, so they can't be all that bad.

Anyone else ridden Gumballs, I'd like to hear your reviews.
Dan Mitchell, aka PA Dan

Jack Quarantillo
Posts: 428
Joined: Mon Oct 13, 2003 3:15 am
Location: G'burg, MD, USA
Contact:

Post by Jack Quarantillo » Thu Dec 11, 2003 4:18 am

Now that the Gumballs are "special deal'd" with built-in builtins, shoud we revisit this topic?

Yes, the deal is on, buy 2 sets of Gumballs, and get free Abec5 builtins.

So, are these good for anything tighter than GS or Hybrid stuff?

Q

RL

big TS wheels?

Post by RL » Thu Dec 11, 2003 5:47 am

Michael Dong said:
They may be the inertia needed to see real tight slalom at some of the bigger races where cone rates of 4 to 6 cones per second will preclude their use by anyone.
Michael, Im not understanding this statement. Why would these wheels be so good for TS? They seem quite tail for TS dont they?

Post Reply